Parex Highway Repair Products

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product

Description

Pack Size

Yield

 

 

 

 

 

 

Highway CA45

Highway CA45 is a pre-mixed cement based non- shrink bedding mortar suitable for the support of road ironwork and highway furniture. The mixed mortar, when placed, will harden in approximately 10 minutes. The compressive strength gain will reach 20N/mm² within 45minutes allowing early opening of roads to vehicular traffic.

25Kg Bag

25kg bag of Highway

CA45 yields approx

12.75 litres.

 

 

 

 

 

 

Highway CA1

Highway CA1 is a pre-mixed cement based non- shrink bedding mortar suitable for the support of road ironwork and highway furniture. The mixed mortar, when placed, will harden in approximately 10 minutes. The compressive strength gain will reach 20N/mm2 within 1 hour allowing early opening of roads to vehicular traffic.

25Kg Bag

25kg yields

12.5 litres of Concrete

 

 

 

 

 

 

Highway C2

Highway C2 is a pre-mixed Portland cement based nonshrink bedding mortar suitable, for the support of road ironwork and highway furniture. The mixed mortar, when placed, will harden in approximately 10 minutes. The compressive strength gain will reach 20N/mm2 within 2 hour allowing early opening of roads to vehicular traffic.

25Kg Bag

25kg yields

12.5 litres of Concrete

 

 

 

 

 

 

Highway Fast Patch

Highway Fast Patch is a two component product, supplied as a pre-mixed Portland cement based non-shrink powder component plus a co-polymer latex gauging liquid. The compressive strength gain will reach 10N/mm2 within 1 hour allowing for foot traffic. Vehicular traffic strength of 20N/mm2 will be typically obtained within 4 hours.

10Kg

Combined Units

5 litres of mixed material

 

 

 

 

 

 

Highway FSC6

A single pack pre-mixed Portland cement based non-shrink concrete suitable for thick section placing where rapid early strength gain is required. It can be used for the support of road ironwork and highway furniture, barriers and stanchion posts.

The mixed concrete, when placed, will harden in approximately 10 minutes. Compressive strength will reach 20N/mm2 within two hours.

25Kg

25kg yields

12.5 litres of Concrete

 

 

 

 

 

 

Highway FSC10

FSC-10 is a pre-packaged special cement based concrete containing graded aggregates and non- shrink additives. FSC-10 is supplied to site ready to use only requiring the addition of mixing water to produce a medium workability high strength durable concrete. The mixed concrete, when placed, will harden in approximately 10 minutes and reach initial set in approximately 15 minutes. FSC-10 can be placed in a single pass from 30mm to 400mm

25Kg

25kg yields 12 litres of Concrete

 

 

 

 

 

 

Highway Super C

Super C is a self contained product only needing to be mixed with water on site to produce a firm mortar. The product is chloride free and can be safely used with cast iron and steel units. The

mortar can be placed in sections of 20mm to 50mm in thickness and greater thicknesses can be built  up in layers. After placement no special curing is required in moderate ambient conditions

25Kg Bag

25kg yields

11.5 litres Concrete

 

 

 

 

 

 

Highway T-10

Rapid Setting Concrete

T-10 is supplied to site ready to use, only requiring the addition of mixing water to produce a stiff rapid hardening concrete. The mixed concrete, when placed, will harden in approximately 5 minutes  and reach initial set in approximately 10 minutes, depending upon climatic conditions.

T-10 can be placed in a single pass from 30mm to 500mm. Thicker sections can be achieved by placing additional layers once the preceding layer has reached initial set.

25Kg Bag

25kg yields

11.5 litres Concrete

 

 

 

 

 

 

Highway Framefix Mortar UF

Highway Framefix Mortar UF is a pre-mixed Portland cement based non- shrink bedding mortar suitable for the support of road ironwork and highway furniture. The mixed mortar, when placed, will harden in approximately 15 minutes. The compressive strength gain will reach 20N/ mm² within 1 hour allowing early opening of roads to vehicular traffic. At three hours the compressive strength will exceed 50 N/mm² and the tensile strength will exceed 5 N/mm² conforming to the

DTI Design Manual for Roads and Bridges: Mortars for the Bedding of Iron Work (HA 104/09).

25Kg Bag

25kg yields 12 litres of Concrete

 

 

 

 

 

 

Highway Framefix Grout

Framefix Grout is a polyester resin based material used for grouting where rapid early strength development is required. The mixed grout will harden to give rapid strength gain reaching 60N/ mm² in 1 hour allowing opening to vehicular traffic

25Kg

Combined Pack

25kg yields

12.5 litres of  Grout

 

 

 

 

 

 

Highway Framefix Mortar

Framefix Mortar is polyester resin based material used for the bedding and leveling of all types of frames in vehicular road surfaces. The mixed mortar will harden to give rapid strength gain reaching 52N/mm² in 1 hour allowing road opening to vehicular traffic. Framefix Mortar complies with Highways Agency Advice Note 104/09 Design Manual for Roads and Bridges

25Kg

25kg yields

12.5 litres Mortar

 

 

 

 

 

 

Highway Kerbfix

Parex Kerbfix is a hand-applied polyester mortar used for the bedding and fixing of paving units where same day trafficking and/or exceptional bond is required.

14Kg Box

14kg yields 7 litres of Mortar

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Description

25Kg Bag

25kg bag of Highway CA45 yields approx 12.75 litres.

Download Our Entire Product Catalog

For more specification products visit our partner site

Visit Solco

Solco are leaders in the supply of Structural Waterpoofing, Gas Protection Systems, Sealants & Building Chemical Solutions to the construction industry.

Information

About
Products
News
Downloads
Capability
Contact

OTHER LINKS

Terms Of Use
Privacy Policy
Terms & Conditions
Reg No. 04631406

CONTACT US

Head Office
Bluebay, Unit 51-52
Portmanamoor Rd Ind Est
Ocean Park, Cardiff
CF24 5HB

Tel: 0292 049 5555

enquiries@bluebaybp.co.uk

LONDON & SOUTH EAST
Tel: 01582 594 007
Email: luton@bluebaybp.co.uk
NORTH WEST & MIDLANDS

Tel: 01925 875 588
Email: warrington@bluebaybp.co.uk

HEAD OFFICE & ACCOUNTS

Tel: 02920 021 474
Email: accounts@bluebaybp.co.uk

WEST & WALES
Tel: 02920 495 555
Email: sales@bluebaybp.co.uk
NORTH & SCOTLAND
Tel: 01914 166 572
Email: gateshead@bluebaybp.co.uk