Parex Concrete Repair Products

               

Product

Description

Pack Size

Coverage

       

100 Newton Grout

100 Newton Grout is an ultra high strength grout specially formulated using a Portland cement powder mix. The mix design includes special shrinkage compensating components, which give anon-shrinkgroutinboththeplasticandhardened states.

15Kg Pail 25Kg Bag

15Kg will yeild 8 litres of grout

       

CS Concrete

CS Concrete is an aggregated Portland cement based product giving high strength, good flow and non-shrink properties. The maximum size

aggregate is 6mm which enables sections of 75mm to 150mm to be placed.

25Kg Bag

25 kg yields

12.5 litres of Concrete

       

CS Grout

CS Grout is a Portland cement based product giving high strength, good flow and non-shrink properties. Placed grout gives structural support and good vibration resistance. CS Grout is chloride free and can be safely used in contact with steel.

25Kg Bag

25 kg yields

13.25 litres of grout

       

CSW Grout

CSW Grout is a specially formulated, Portland cement powder mix. The mix design includes special shrinkage compensating components plus powerful plasticising agents which produce a free flowing grout at low water content. CSW Grout contains an integral waterproofer which imparts good water resistance to the placed grout.

25Kg Bag

25 kg yields

13.25 litres of grout

       

Railfast Grout

Railfast Grout is a polyester resin based material used for grouting where rapid early strength development is required. Railfast Grout can be used at section depths between 10 and 25mm or for section depths between 25 and 75mm with the aggregate component.

32.8Kg

32.8 kg bag yields

16.4 litres of grout

       

E20

Epoxy Grout

E20 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in nominally parallel gaps down to 8mm

24.6Kg

13.25 litres of grout

       

E33

Epoxy Grout

E33 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in gaps down to 10mm

28.1Kg

14.75 litres of grout

       

E70

Epoxy Grout

E70 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in gaps between 35mm to 75mm

33.8Kg

16.75 litres of grout

       

E140

Epoxy Grout

E140 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in gaps between 70mm to 140mm.

38.98Kg

18.75 litres of grout

       

E200

Epoxy Grout

Epoxy 200 is an epoxy resin based anchor grout with high flow properties capable of placing in annular gaps 2 mm to 12 mm

1.0Kg

0.65 litres of grout

       

Dry Pack C

Dry Pack C is a Portland cement based powder mix including special shrinkage compensating components. The mixed material produces a mortar, which may be rammed into gaps between concrete units, without the use of shuttering, to create a supporting fill

25Kg Bag

25Kg will yeild 12 litres of mortar

       

High Build Mortar

High Build Mortar is a high strength non-shrink cementitious product with “stay as placed” properties. Suitable for use in structural support situations and where good vibration resistance is required. The prepared mortar can be used as a dry pack or placement without shuttering in gaps of 10mm to 50mm.

25Kg Bag

25Kg will yeild 12.5 litres of mortar

       

Lightweight Mortar Rapid

Lightweight Mortar Rapid is a fast setting, low density concrete repair mortar. The mix design produces a high build, polymer and fibre modified, cementitious concrete repair system also capable of being applied as a fair faced finish in vertical and overhead situations

18Kg Bag

18Kg will yeild 13.5 litres of mortar

       

Pouring Concrete

Pouring Concrete is a blend of special Portland cements, high quality non ASR reactive aggregates and includes microsilica. The products contain no iron, high alumina cement, chloride or deleterious substances. The mortar powder, when mixed with water, produces a homogenous concrete which will not segregate or bleed and is non-shrink.

25Kg Bag

25 kg yields

11.75 litres of concrete

       

Tecfast Concrete

Tecfast Concrete complies with the requirements of BS EN 1504-3 Class R4.

Tecfast Concrete is a single pre-mixed Portland cement based non-shrink concrete designed with selected graded silica aggregates and additives. The mixed product may be placed in sections of 20mm up to 650mm in a single pour.

25Kg Bag

25 kg yields

11.5 litres of concrete

       

Epoxy Adhesive 305

Epoxy Adhesive 305 is an epoxy resin based compound suitable for placing using hand tools or by means of a hand held applicator gun. The three pack product consists of resin in a mixing tub, a bottle of hardener and a bag of specially graded fillers. Epoxy Adhesive 305 is used for the jointing of concrete, brickwork, masonry, elastomeric bearings, timber, ceramic tiles, aluminium & steel.

1.5Kg

&4.5Kg

1.0 litre of adhesive per 1.5Kg

       

Tecgrip V

Tecgrip V consists of a low viscosity polyester resin plus a catalysed filler. The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes. The mixed grout is coloured dark grey and is used for downward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter

1.0 / 2.5 &

11.8 litre Packs

Dependant upon re-bar sizes see Technical Data Sheet

       

Tecgrip VL & VXL

Tecgrip VL and VXL consists of a low viscosity polyester resin plus a catalysed filler. The two components are mixed to produce a filled resin grout which may be poured or pumped into suitably prepared anchor holes. The mixed grout is coloured dark grey and is used for downward facing holes where the hole diameter is (VL) 20mm to 50mm (VXL) 50mm to 75mm greater than the bolt or bardiameter

13.7Kg

pack (7.8litres)

Dependant upon re-bar sizes see Technical Data Sheet

                     
               
               
               
               
               
               

Download Our Entire Product Catalog

For more specification products visit our partner site

Visit Solco

Solco are leaders in the supply of Structural Waterpoofing, Gas Protection Systems, Sealants & Building Chemical Solutions to the construction industry.

Information

About
Products
News
Downloads
Capability
Contact

OTHER LINKS

Terms Of Use
Privacy Policy
Terms & Conditions
Reg No. 04631406

CONTACT US

Head Office
Bluebay, Unit 51-52
Portmanamoor Rd Ind Est
Ocean Park, Cardiff
CF24 5HB

Tel: 0292 049 5555

enquiries@bluebaybp.co.uk

LONDON & SOUTH EAST
Tel: 01582 594 007
Email: luton@bluebaybp.co.uk
NORTH WEST & MIDLANDS

Tel: 01925 875 588
Email: warrington@bluebaybp.co.uk

HEAD OFFICE & ACCOUNTS

Tel: 02920 021 474
Email: accounts@bluebaybp.co.uk

WEST & WALES
Tel: 02920 495 555
Email: sales@bluebaybp.co.uk
NORTH & SCOTLAND
Tel: 01914 166 572
Email: gateshead@bluebaybp.co.uk